Chapter 5 Paper Handling 5-15
Paper Handling
2Raise both paper output guides.
Ink
Cartridge
BCl-21
Color
Made in
Japan
Ink
Cartridge
BCl-21
Black
Made in
Japan
1
2
3Make sure the paper thickness lever is set to
e (right).
For details, p. 5-6.
cDo not set the paper thickness lever
while the unit is printing since this will
cause problems.
4Cut the banner paper along one of the
perforations to the length required. Then
gently fold along the perforations between the
first and second sheets.
Your banner can be up to six sheets (1782 mm)
long.
5Place the banner paper behind the unit on a
flat surface. Then insert the first sheet into the
multi-purpose tray q, and align the right edge
of the sheet with the right side of the multi-
purpose tray. Slide the paper guide against
the left edge of the sheet, leaving a 1 mm gap
between the paper guide and the edge of the
sheet w.
Make sure the sheet is under the tab on the multi-
purpose tray.
Make sure the sheets behind the unit are aligned
with the multi-purpose tray.
Tab