7-24 Sending Faxes Chapter 7
7Press Start (Start/Scan) to begin scanning
for sending.
The unit automatically dials the access and ID
codes registered under the M button and then
dials the other party’s fax number.
To cancel sending once dialling has started, press
Stop then T. ( p. 7-10)
n To protect your access and ID codes, these are not printed on any reports.
If you frequently call the same numbers with this feature, you can register the access and ID
codes together with a fax/telephone number for speed dialling. ( below)

Registering Speed Dialling With the M Button

By registering your access and ID codes together with the fax/telephone number for one-
touch speed dialling or coded speed dialling, you can send documents or make calls over
these services at the press of one or a few buttons and without having to press M.
n You must first register the access and ID codes under the M button before you can register the M
button under speed dialling entries. ( p. 7-22)
For details on registering numbers for speed dialling, Chapter 6.
Follow this procedure to register the M button settings for speed dialling:
1During speed dialling registration, when you
come to the step that requires you to enter
the fax/telephone number, press M.
2Use the numeric buttons to enter the fax/
telephone number you want to register.
3Continue with the procedure for registering
entries for one-touch or coded speed dialling.
Once you have completed the above procedure, you can simply press the one-touch speed
dialling button or press Coded Dial and enter the coded speed dialling code to dial the fax/
telephone number using the UK Call, Global Call, or Day Call Service of Cable and Wireless
Communications Limited.
TEL=M_
Ex:
TEL=M987 6543_
Ex: