Chapter 7 Sending Faxes 7-15
Sending Faxes
Regular dialling:
Use the numeric buttons to enter the fax
number, then press Set.
You can only enter one fax number this way.
n If you enter an incorrect destination, press
Function, then Clear. Then press
Function again, and enter the correct
destination.
You must enter the second fax number
within five seconds of entering the first
one. All subsequent fax numbers must be
entered within 10 seconds. If you wait
longer than these times, the unit
automatically begins scanning the
document for sending. If you prefer the
unit not to do this, disable the TIME OUT
setting. ( p. 14-6)
If you want to review the numbers you
entered, press Function and use d or u
to scroll through the numbers.
5Press Start (Start/Scan) to begin scanning
for sending, or wait a few seconds for the unit
to begin scanning automatically.
The unit will first send the document to the one-
touch speed dialling destinations, then the coded
speed dialling destinations, and finally to the
destination dialled using regular dialling.
If you prefer the unit never to scan a document
automatically after a few seconds, disable the
TIME OUT setting. ( p. 14-6)
To cancel sending, press Stop then T. Sending to
all destinations you specified in step 4 will be
cancelled (you cannot cancel only one
destination), and the unit will print a MULTI TX/RX
REPORT. ( p. 11-5)
n If a number is busy, the unit will continue sending to the other destinations and then redial the
number that was busy.
If the unit’s memory becomes full while scanning your document, MEMORY FULL will appear in
the LCD. If this happens, remove the remainder of the document from the ADF (you may need to
open the operation panel to do so), then divide the document into several sections and send
each section separately.
If you attempt to send a colour document to a fax machine that does not support colour faxing,
the document will not be sent, the LCD will display TRY AGAIN IN B&W (TRY AGAIN IN
B/W), and transmission to that destination will be cancelled. Try sending again in black & white.
(For the MultiPASS C75/FAX-B215C, this occurs even if the COLOUR DIRECT TX setting is
enabled.)
TEL=2 887 0166
Ex: