Chapter 2 Setting Up 2-15
Setting Up
nWhen you plug in your unit for the first time,
the cartridge holder automatically moves to
the centre of the unit so you can install the
BJ cartridge. If this does not happen, press
C (inside the unit).
c Do not try to manually move or stop
the cartridge holder since this may
damage the unit.
Do not touch the components shown
or any metal parts since this may
adversely affect operation of the unit
and/or affect print quality.
4Raise the blue cartridge lock lever on the
cartridge holder.
Ribbon cable Guide rail
Round shaft
Circuit board