C: Setting Custom Functions

C.Fn-21: ;(Light distribution)

You can change the light distr bution (flash coverage) of the Speedlite in relation to the shooting angle of view when the flash coverage is set to “Automatic (L)”.

0:8(Standard)

The optimum flash coverage for the shooting angle of view is set automatically.

1:9(Guide number priority)

Although the periphery of the picture is slightly darker than the 0 setting, this is convenient when you want to give priority to the flash output. The flash coverage is set automatically to a slightly more telephoto position

than the actual shooting angle of view. The flash icon on the LCD panel changes to <k>.

2::(Even coverage)

Although the shooting distance is slightly shorter than the 0 setting, this is convenient when you want to minimize light fall off at the periphery of the picture. The flash coverage is set automatically to a slightly wider

position than the actual shooting angle of view. The flash icon on the LCD panel changes to <l>.

C.Fn-22: <(LCD panel illumination)

When a button or dial is operated, the LCD panel illuminates. You can change this illumination setting.

0:12sec (On for 12 sec.)

1:OFF (Disable panel illumination)

2:ON (Illumination always on)

C.Fn-23: ?(Slave flash battery check)

When the slave unit is fully charged during wireless flash shooting, the AF- assist beam emitter of the slave unit blinks. You can disable this operation. Set this function on each slave unit.

0: =(AF-assist beam, Qlamp)

1: >(Qlamp)

100

Page 100
Image 100
Canon Canon Speedlite 600EX RT instruction manual 100