q: Wireless Multiple Flash Shooting with Manual Flash Output 
This describes wireless (multiple flash) shooting using manual flash. You can shoot with a different flash output setting for each slave unit (firing group). Set all parameters on the master unit.
1
2
Set the flash mode to <q>.
Set the number of firing groups.
While <M> is displayed, press function button 2 <T> and set the groups to fire.
The setting changes as follows each time you press the button:
ALL (_) →
A/B (%) →
A/B/C (]).
3 Select a firing group.
Press function button 3 <F>, turn <9> and select the group for which you want to set the flash output.
4 Set the flash output.
Press function button 3 <1>. Turn <9> to set the flash output, and press the <8> button.
Repeat steps 3 and 4 to set the flash output of all groups.
5 Take the picture.
X Each group fires at the set flash ratio.
When ALL <_> is set, set A, B or C as the firing group for the slave units. The flash will not fire if it is set to D or E.
To fire multiple slave units wi h the same flash output, select ALL <_> in step 2.
64
