
Flash Control from Camera’s Menu Screen
Flash firing
To perform flash shooting, set to [Enable]. To use the flash’s AF- assist beam only, set to [Disable].
E-TTL II flash metering
For normal exposures, set it to [Evaluative].
If [Average] is set, the flash exposure will be averaged for the entire scene metered by the camera. Flash exposure compensation may be necessary depending on the scene. This setting is for advanced users.
Flash synchronization speed in Av mode
You can set the flash sync speed when shooting in
Flash mode
You can select the flash mode from
When the flash’s Custom Function
Shutter synchronization
You can select the flash firing timing/method from [1st curtain], [2nd curtain] and
Flash exposure compensation
In the same way as normal exposure compensation, you can set exposure compensation for flash. The flash exposure compensation amount can be set up to ±3 stops in
FEB
You can take three shots while automatically changing the flash output. The settable range is up to ±3 stops in
44