Installing the Batteries
Install four AA/LR6 batteries.
1 Open the cover.
Slide the lock lever to the left as shown in ", slide the cover down, and open the battery compartment cover.
2 Install the batteries.
Make sure the + and – battery contacts are correctly oriented as shown in the battery compartment. The grooves on the side surfaces of the battery compartment indicate
3 Close the cover.
Close the battery compartment cover and slide it up.
X When it clicks in place, the battery compartment cover is locked.
Recycling Time and Number of Flashes
Recycling Time | Number of Flashes | ||
Quick Flash | Normal Flash | ||
| |||
Approx. 0.1 to 3.3 sec. | Approx. 0.1 to 5.5 sec. | Approx. 100 to 700 flashes | |
|
|
| |
Based on new AA/LR6 alkaline batteries and Canon’s testing standards. The Quick Flash function enables flash shooting before the flash is fully charged (p.16).
Using AA/LR6 batteries other than the alkaline type may cause improper battery contact due to the irregular shape of the battery contacts.
If you change the batteries after firing flashes continuously, be aware that the batteries might be hot.
14
