2 Prepare to load paper.
(1) | Open the Rear Tray and pull out the Paper | (1) | |
| Support to support the paper. | ||
|
| ||
(2) | Open the Front Tray. | (4) | |
(3) | Extend the Output Tray Extension. | ||
|
Note
When closing the Output Tray Extension after printing, lift it up slightly.
(4) Adjust the position of the Paper Thickness | (2) | |
Lever. | ||
Set it to the right when printing on envelopes or |
| |
(3) | ||
other type of the paper. See “Paper Handling” | ||
| ||
on page 5. |
|
Note
If the corners or edges of the paper are smudged, try to print with the Paper Thickness Lever set to the right. It may improve print quality.
Reset the Paper Thickness Lever to the left when you finish printing.
For details on the Paper Thickness Lever, refer to “Front View” in “Main Components” of the User’s Guide
3 Load the paper.
(1) Load the paper in the Rear Tray with the print | (A) |
side facing UP. | (1) |
.
Important
Do not load higher than the Load Limit Mark (A).
(2) Align the paper stack against the Cover Guide
on the right side of the Paper Support.
Note
(3)
Make sure that the Cover Guide is set upright when you load paper in the Rear Tray.
(3) Pinch the Paper Guide and slide it against the | (2) |
| |
left side of the paper stack. |
|
4 Select Rear Tray for Paper Source, and the size and type of the loaded paper in Page Size (Paper Size) and Media Type in the printer driver.
Note
For details on printer driver settings, see “Printing with Windows” on page 17 or “Printing with Macintosh” on page 18.
Before Using the Printer | 11 |