Error No.: 300 Is Displayed
Cause | Action | |
The printer is not ready. | Confirm that the POWER lamp is lit green. | |
|
| If the POWER lamp is off, turn the printer on. |
|
| While the POWER lamp is flashing green, the printer is initializing. Wait until the |
|
| POWER lamp stops flashing and remains lit green. |
|
| If the ALARM lamp is flashing orange, an error may have occurred in the |
|
| printer. For details on how to resolve the error, see “ALARM Lamp Flashes |
|
| Orange” on page 64. |
Printer is not connected properly. | Make sure that the USB cable is securely plugged in to the printer and the | |
|
| computer. |
|
| z If you are using a relay device such as a USB hub, disconnect it, connect the |
|
| printer directly to the computer, and try printing again. If printing starts |
|
| normally, there is a problem with the relay device. |
|
| Consult the reseller of the relay device for details. |
|
| z There could also be a problem with the USB cable. Replace the USB cable |
|
| and try printing again. |
Your printer is not selected in Printer | Select your printer’s name in Printer on the Print dialog box. | |
on the Print dialog box. | If your printer’s name does not appear in Printer, follow the procedure below to | |
|
| check that the driver for your printer is installed to your computer. |
|
| (1)Select Print & Fax Preferences from Printer. |
|
| In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List from Printer. |
|
| (2)Check that your printer’s name is displayed in the list of printers and that the |
|
| check box is selected. |
|
| In Mac OS X v.10.2.8, check that your printer’s name is displayed in the |
|
| Printer List. |
|
| (3)If your printer’s name is not displayed, click Add(+) to add the printer. |
|
| If you cannot add the printer, follow the procedure described in your setup |
|
| sheet to reinstall the printer driver. |
|
|
|
|
|
|
Error No.: 1700/1710 Is Displayed
Cause | Action | |
The ink absorber is almost full. | See “Eight flashes: Ink absorber is almost full.” on page 64 in “ALARM Lamp | |
|
| Flashes Orange” on page 64. |
|
|
|
|
|
|
Error No.: 2001 Is Displayed
Cause | Action |
No response from connected digital | See “Nine flashes: No response from connected digital camera or video |
camera or video camcorder. / | camcorder. / Connected digital camera or video camcorder is not compatible |
Connected digital camera or video | with this printer.” on page 65 in “ALARM Lamp Flashes Orange” on page 64. |
camcorder connected is not compatible |
|
with this printer. |
|
Troubleshooting 67