5
Install the ink tank.
(1)Insert the front end of the ink tank into the Print Head.
Make sure the position of the tank matches the label (A).
(2)Press on the 
mark on the ink tank until the ink tank snaps firmly into place.
(3)Make sure that the ink lamp lights up red.
Important
The printer cannot be used unless all the ink tanks are installed.
(A)
(1)
(3)
(2)
6
Close the Top Cover.
Note
zIf the ALARM lamp still flashes orange after the Top Cover is closed, see “ALARM Lamp Flashes Orange” on page 64.
zWhen you start printing after replacing the ink tank, Print Head Cleaning is performed automatically. Do not perform any other operations until Print Head Cleaning finishes. The POWER lamp flashes green during cleaning.
Routine Maintenance | 27 |