2
.
Retract the Paper Support.
Important
Envelopes may not be fed properly if the Paper Support is extended.
3
.
.
Load the envelopes.
(1)Load the envelope against the Cover Guide (the right side of the Paper Support). Load with the address side facing UP and the rear flaps DOWN on the left. Up to 10 envelopes can be loaded at once.
Important
Make sure that the Cover Guide is set upright, when you load paper in the Rear Tray.
(2)Pinch the Paper Guide and slide it against the left side of the envelope.
(3)Set the Paper Thickness Lever to the right.
Note
Reset the Paper Thickness Lever to the left when you finish printing. For details on the Paper Thickness Lever, refer to “Front View” in “Main Components” of the User’s Guide
(2)(B) (1)
(3)
(A)
(A)Printing orientation
(B)Make sure the flaps are folded.
4 Specify the settings in the printer driver.
(1)Select Envelope in Media Type.
(2)Select the size for envelopes.
In Windows, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3)Select Landscape in Orientation.
.
Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the wrong direction.
Note
For details on printer driver settings, see “Printing with Windows” on page 17 or “Printing with Macintosh” on page 18.
Before Using the Printer | 15 |