(2)Operation panel removal

(I)Remove the panel cover L and R.

-Insert a flat-blade screwdriver into a space between the panel cover and the scanner unit, and slowly push the cover up to remove it.

-For claws, see the photos below (5 claws each).

(II)Remove the panel board.

-Remove the 4 screws (in the blue circles in the photo below) from the panel board.

-Release the 2 claws (in the yellow circles in the photo), and raise the panel board.

-While paying attention to the 3 locations at the top of the panel board (in the green circles in the photo) , turn the panel board over.

1-20

Page 25
Image 25
Canon MP800 manual Operation panel removal