-When assembling the scanner stop arm, make sure the black sticker side is up, as shown in the photos below (overhead view).

(VIII) Remove the FAU and the scanner unit.

-Lift the FAU out from the hinge holes of the scanner unit.

-Disengage one side of the scanner unit from the main case, then the other side (see the photo on the right).

(IX) Remove the paper support.

-Disengage one side of the paper support from the main case, then the other side of the paper support.

-The photo on the right shows the main unit with the external parts removed.

1-19

Page 24
Image 24
Canon MP800 manual