Canon MP800 manual Part 2 2. Cleaning Mode and Amount of INK Purged

(All in sequence)

At ink tank replacement*4

(Black/Color/All in sequence)

Manual cleaning

(Black/Color/All at the same time)

When an ink tank is replaced (without the print	0.38	(Black)
head removal or re-installation)	1.06	(Color)
- Via the operation panel (All at the same time	0.20	(Black)
only)	0.65	(Color)
- Via the MP driver (Selectable from Black,
Color, or All at the same time)

80 (All in sequence)

40(Black)

65(Color)

45 (All at the same time)

35(Black)

40(Color)

Deep cleaning

(Black/Color/All at the same time)

If the print head has not been capped before power-on

(All in sequence)

Via the MP driver (Selectable from Black,	1.95	(Black)
Color, or All at the same time)	1.06	(Color)
	0.38	(Black)
	1.06	(Color)

90 (All at the same time)

45(Black)

65(Color)

80 (All in sequence)

*1: The counter for the on-arrival cleaning is checked at opening and closing of the scanning unit (the first opening and closing only), before start of printing, at dot-count cleaning (at paper ejection), and at manual cleaning, and the on- arrival cleaning is performed according to the counter value. After each on-arrival cleaning, the counter value is reduced by 1.

When the counter value is 3, 2, or 1: On-arrival cleaning is performed.

When the counter value is 0: On-arrival cleaning is not performed.

*2: When 24 to 60 hours have elapsed since the previous Black cleaning, timer cleaning - 0 is performed. However, this cleaning will be conducted up to 5 times from the printer installation, and no further timer cleaning - 0 will be performed.

*3: The period of time since the previous cleaning is counted by Black and Color separately. For this reason, the cleaning mode may differ according to Black or Color.

*4: When only the black ink tank is replaced, Black cleaning is performed. One of the color ink tanks is replaced, Color cleaning is performed. Both the black and color ink tanks are replaced, All-at-the-same-time cleaning is performed.

To the table of contents To the top

<Part 2: 2. CLEANING MODE AND AMOUNT OF INK PURGED>

2-4