1 time

Orange (Alarm)

Service test print

2 times

Green (COPY)

EEPROM information

 

 

print

3 times

Orange (Alarm)

EEPROM initialization

4 times

Green (COPY)

Waste ink counter

 

 

resetting

See 3-4. Verification Items, (1) Service test print.

Set a sheet of A4 or letter size paper.

See 3-4. Verification Items, (2) EEPROM information print.

The following items are NOT initialized, and the shipment arrival flag is not on:

-USB serial number

-Destination settings

-Waste ink counter

-CD / DVD correction value

-LF correction value

Once in the service mode: Press the On/Off button 2x after pressing the Stop button 4x.

5 times

Orange (Alarm)

6 times

Green (COPY)

7 times

Orange (Alarm)

8 times

Green (COPY)

Destination settings

Print head deep cleaning LF correction

CD / DVD check pattern print

See 3-3. Adjustment / Settings, (8) Service mode, "Destination settings procedures."

(Cleaning of both black and color)

See 3-3. Adjustment / Settings, (8) Service mode, "LF correction procedures."

Not used in servicing

9 times

Orange (Alarm)

CD / DVD print position

 

 

correction (horizontal: X

 

 

direction)

10 times

Green (COPY)

CD / DVD print position

 

 

correction (vertical: Y

 

 

direction)

11 times

Orange (Alarm)

Button and LCD test

12 times

Green (COPY)

Return to the menu

 

 

selection

13 times

Orange (Alarm)

Return to the menu

 

 

selection

14 times

Green (COPY)

Left margin correction

15 times

Orange (Alarm)

Waste ink amount setting

16 to 21 times

Green at even

Return to the menu

 

numbers (COPY)

selection

 

Orange at odd

 

 

numbers (Alarm)

 

Not used in servicing.

Not used in servicing.

See 3-3. Adjustment / Settings, (8) Service mode, "Button and LCD test procedures"

Not used in servicing.

See 3-3. Adjustment / Settings, (8) Service mode, "Waste ink amount setting procedures"

Note: - If the Stop/Reset button is pressed 16 or more times, the Alarm LED (orange) or COPY button (green) lights steadily without any changes.

-At the end of the service mode, press the ON/OFF button. To protect the media sensor from being dislocated during transportation, the paper lifting plate of the sheet feeder unit will be raised.

<Destination settings procedures>

In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the table below, and press the ON/OFF button.

Time(s)

LED indication

Destination

CD / DVD print

0 times

Green (COPY)

No change of the destination

 

1 time

Orange (Alarm)

Japan

Supported

2 times

Green (COPY)

Korea

Not supported

1-28

Page 33
Image 33
Canon MP800 manual See 3-4. Verification Items, 1 Service test print