Note: After setting the destination without logic board replacement, be sure to initialize the EEPROM (to prevent
the Print Beam settings or copy paper settings from being different from the destination settings).
Confirm the model name and destination in service test print or EEPROM information print.
[See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
<Button and LCD test procedures>
Confirm the operation after replacement of the operation panel unit, logic board, or LCD.
1) Press the Stop/Reset button. The LCD turns blue, waiting for a button to be pressed.
2) Press each button on the operation panel.
The LCD is divided into segments, representing each button. The color of a segment corresponding to the pressed button
changes to red.
3) When all the buttons are pressed, the entire LCD changes to a full red screen, and no further pressing of the buttons is
accepted.
3 times Orange (Alarm) US Not supported
4 times Green (COPY) Europe Supported
5 times Orange (Alarm) Australia Supported
6 times Green (COPY) Asia Supported
7 times Orange (Alarm) China Supported
8 times Green (COPY) Ta iwan Supported
9 times or
more Orange (Alarm) Return to the menu selection
1-29