Cause | Action |
PictBridge compliant device is | See “UNSUPPORTED USB HUB” in “An Error Message Is Displayed on the |
connected via a USB hub. | LCD” on page 78. |
Error Message Appears on a PictBridge Compliant Device
The following are the possible errors that may occur when printing directly from a PictBridge compliant device and the countermeasures to clear them.
Note
zThis section describes errors that are indicated on
For errors on
zFor the errors indicated on the PictBridge compliant device and their solution, also refer to the instruction manual of the device. For other troubles on the device, contact the manufacturer.
Error Message | Action |
On PictBridge |
|
Compliant Device |
|
“Printer in use” | If the machine is printing from the computer or warming up, wait until the job |
| ends. When it is ready, the machine starts printing automatically. |
| When printing first after changing the media type, the message asking you to |
| confirm the position of the paper thickness lever may appear on the LCD on the |
| machine. If this message is displayed, make sure that the paper thickness lever |
| is set appropriate, then press the OK button on the machine. |
“No paper” | Load paper in the Rear Tray, and select Continue* in the display on your |
| PictBridge compliant device. |
| * To resume printing, you can also press the OK button on the machine instead |
| of selecting Continue on the camera. |
“Paper Error” | Open the Paper Output Tray. The machine resumes printing. |
“Paper jam” | Select Stop in the display on your PictBridge compliant device to stop printing. |
| Remove the jammed paper, load new paper, press the OK button on the |
| machine, and try printing again. |
“Printer cover open” | Close the Scanning Unit (Printer Cover) on the machine. |
“No print head” | The FINE Cartridge is not installed or the Cartridge may not be compatible with |
| this machine. |
| For details on how to resolve the error, see “CHECK INK U051/U052/U053/ |
| U059” in “An Error Message Is Displayed on the LCD” on page 78. |
“Waste tank full”/ | The ink absorber is nearly full. |
“Ink absorber full” | For details on how to resolve the error, see “REQ. SERVICE SOON” in “An |
| Error Message Is Displayed on the LCD” on page 78. |
96Troubleshooting