Printing Does Not Start/Printing Is Blurred/Colors Are Wrong/Straight Lines Are Misaligned
Cause |
| Action | |
FINE Cartridge is not installed properly. | Remove the FINE Cartridge, then reinstall it. | ||
/ There is no ink left. | Small dusts may be stuck between the contact points. In this case, the print | ||
| result may be improved by reinstalling the FINE Cartridge. | ||
|
|
|
|
|
|
|
|
Also, check that the protective tape (A) is removed.
| (A) |
|
|
Print Head nozzles are clogged. | See “When Printing Becomes Faint or Colors Are Incorrect” on page 59 and |
| perform any necessary maintenance operation. |
The media is loaded with the wrong | Many types of paper are made to be printed on only a particular side of the |
side facing upwards. | paper. |
| Printing on the wrong side may cause unclear prints or prints with reduced |
| quality. |
| For detailed information on the printable side, refer to the instruction manuals |
| supplied with the paper. |
Print Head is misaligned. | If you did not align the Print Head after installation, straight lines may be printed |
| misaligned. Make sure to align the Print Head after you install it. |
| See “Aligning the Print Head” on page 64 to perform Print Head Alignment using |
| the Operation Panel. |
Cause | Action |
Print Head nozzles are clogged. | See “When Printing Becomes Faint or Colors Are Incorrect” on page 59 and |
| perform any necessary maintenance operation. |
Troubleshooting 85