Canon MX310 Sending Faxes, 1.SCAN CONTRAST, -LT DK+, FAX, Step, Step, Step, Step, Color, Black, Color, Black, Color, Black, FAX Quality, „Before Sending Faxes

Sending Faxes

„Flow of Sending Faxes

The operation flow of sending faxes is as follows.

Step 1

Load the original to send on the Platen Glass or the ADF.

See “Loading Original Documents” on page 8.

Step 2

Adjust the fax quality and scan contrast.

See “Adjusting the Scan Contrast or the Image Quality (Fax Resolution)” on page 42.

Step 3

Dial the recipient’s number.

Step 4

Send Faxes.

zUsing the Platen Glass

(1)Press the Color or Black button.

If you have two or more pages of the original, load the next page on the Platen Glass and press the Color or Black button.

(2)After scanning all pages of the original, press the OK button to send the fax.

zUsing the ADF

(1)Press the Color or Black button. The fax is sent automatically.

„Before Sending Faxes

zAdjusting the Scan Contrast or the Image Quality (Fax Resolution)

zAdjusting the Scan Contrast

Contrast is the degree of difference between light and dark. Increasing the scan contrast setting further blackens dark areas and whitens bright areas, whereas decreasing the contrast setting reduces the difference between bright and dark areas. You can adjust the contrast among three contrast levels.

(1)Press the FAX button, then press the FAX Quality button.

(2)Press the [ or ] button to select the contrast.

1.SCAN CONTRAST

-LT DK+

Pressing the [ button decreases the contrast, and pressing the ] button increases the contrast.

(3)Press the OK button.

42Faxing