zRedialing

There are two methods of redialing: Automatic redialing and Manual redialing. Automatic redialing is enabled by default.

zAutomatic Redialing

When using memory sending to send a document and the recipient’s line is busy, the machine will redial the number after a specified interval.

You can customize the following automatic redialing settings:

•Whether or not the machine redials automatically

•The number of times the machine redials (1 to 10 times)

•The time interval between redials (1 to 99 minutes)

To change the automatic redialing settings, change the AUTO REDIAL settings in TX SETTINGS under FAX SETTINGS.

Note

zThe range of values you can set for the automatic redialing settings varies depending on the country or region of purchase.

zTo cancel automatic redialing while redialing is in progress, press the Stop/Reset button, then follow the instructions on the LCD.

zTo cancel automatic redialing when redialing is standing by, delete the unsent document from the machine’s memory. For details, see “Printing or Deleting a Document in Memory” on page 54.

zManual Redialing

To redial the fax number last dialed with the Numeric buttons, press the Redial/Pause button.

Note

zFor details on sending faxes, see “Sending Faxes (Memory Sending)” on page 43.

zTo cancel manual redialing, press the Stop/Reset button.

Using Other Useful Sending Functions

„Sending from Your Computer (Windows Only)

If the machine is connected to a computer, you can send faxes using the fax driver from any application software that has a printing function. For details, refer to the FAX Driver Guide on- screen manual.

„Sending/Receiving Using ECM

This machine is set to send/receive faxes in ECM (Error Correction Mode). ECM automatically corrects errors caused by connection troubles, cross-checking the sending and receiving conditions at the sending and receiving ends.

Note

zIf the sender’s or receiver’s fax is not ECM-compatible, the fax will be sent/received in the standard mode.

zYou can disable ECM sending/receiving. Refer to “ECM TX” and “ECM RX” in “FAX SETTINGS” of the User’s Guide on-screen manual.

zIf ECM sending/receiving is enabled, transmission speed may slow down depending on the line or connection conditions.

46Faxing