Cannot Install the MP Drivers

Cause

Action

 

If you were unable to proceed beyond the Printer Connection screen, follow

 

the procedure below to reinstall the MP Drivers.

Unable to proceed beyond the Printer

 

Connection screen.

 

(1)Click Cancel on the Printer Connection screen.

(2)Click Start Over on the Installation Failure screen.

(3)Click Back on the screen that appears next.

(4)Click Exit on the PIXMA XXX screen (where “XXX” is your machine’s name), then remove the CD-ROM.

(5)Turn the machine off.

(6)Restart your computer.

(7)Make sure you have no application software running, including anti-virus software.

(8)Follow the procedure described in your setup sheet to reinstall the MP Drivers.

Installation does not start automatically

 

when the Setup CD-ROMis inserted

 

into your computer’s disc drive.

(1)Click Start then Computer.

 

In Windows XP, Click Start then My Computer.

In Windows 2000, double-click the My Computer icon on the desktop.

(2)Double-click the CD-ROM icon on the displayed window.

Note

To use the Run command to start the setup program, specify your disc drive and then the name of the setup program, MSETUP4.EXE. The drive letter of the disc drive depends on your computer.

Double-click the CD-ROM icon on your desktop to start installation.

If the CD-ROM icon is not displayed, restart your computer.

If the CD-ROM icon is still not displayed, try different disks and see if they are displayed. If other disks are displayed, there is a problem with the Setup CD- ROM. Contact your Canon service representative.

82Troubleshooting