2.Fit the snap at the bottom of the case to the correspond- ing fittings on the case holder.

3.Fit the snaps on the back of the case to the fittings on the back of the case holder.

If you use the shoulder strap, pull it free of the case as shown below.

Hard Strap HS-PS200

This strap is useful to prevent the camera from being accidentally dropped when operated with one hand. Follow the procedures below to install it.

1.If a shoulder strap is installed on the camera, tempo- rarily detach the strap from the strap holder by the display panel. In

addition, remove the buckle and strap guide from the hard strap.

Appendices

101

Page 103
Image 103
Canon Pro70 manual Hard Strap HS-PS200, Appendices 101