
Installing the Battery Pack
Once the battery pack has been fully charged, install it in the camera with the following procedures.
1. Ensure that the mode dial is set to lock.
2.Slide the battery cover in the direction of the arrow.
3.Insert the battery pack as shown.
Battery Pack
NB-4H
•Do not use Battery Pack
•The battery pack continues to discharge a minimal portion of its power while installed in the camera, even with the camera power off. This will shorten the battery life.
•Remove the battery pack from the camera during extended periods of disuse. Place it into the case provided and store it in a cool, dry place.
•To remove the battery pack, pull the eject button in the direction of the arrow.
Preparing the Camera
4. Close the battery cover. | 25 |
|