Preparing the Camera

This section describes the procedures required to prepare the camera for use.

Using the Battery Pack

Use rechargeable Battery Pack NB-4H, which is bundled with the camera, as the battery power source. Ensure that the battery pack has been fully charged before you install it in the camera.

Compact Power Adapter CA-PS200 can be used with power supplies ranging from 100 to 240 volts.

Charging the Battery Pack

The battery pack requires approximately 70 minutes to charge fully from a completely discharged state (as charged with Compact Power Adapter CA-PS200 according to standard Canon testing conditions).

Charging times will vary with the ambient temperature and charge state of the battery pack.

To protect and prolong the battery pack life, do not charge it longer than 24 hours at a time.

Do not charge the battery pack in poorly ventilated areas.

Remove the power cord from the outlet when charging is complete or the compact power adapter is not in use.

Do not charge batteries other than Battery Pack NB-4H with the compact power adapter.

Preparing the Camera

23

Page 25
Image 25
Canon Pro70 manual Using the Battery Pack, Charging the Battery Pack