When the upper indicator flashes green, the autofocus has failed to focus. You can proceed to take the picture by pressing the shutter button all the way, but your subject may not be in focus.

4.After the beeps, press the shutter button all the way.

A single beep after the shutter button is pressed indicates that the image has been captured and is being recorded onto the CF card. The indicator will flash green during the recording process.

5.The next image can be shot as soon as the indicator stops flashing. When you are finished shooting, set the mode dial to lock.

The camera also features a variety of other modes in addition to that shown above, such as the continuous shooting mode and the aperture-priority AE mode. For details, refer to Shooting, pages 44 to 66.

Replaying Images

You can view your images on the camera’s LCD monitor immediately after taking them.

Mode Dial

LCD Monitor - +

1.Open the LCD monitor.

2. Set the mode dial to play.

The last recorded image will display on the LCD monitor.

Quick Start Guide

39

Page 41
Image 41
Canon Pro70 manual Replaying Images, After the beeps, press the shutter button all the way