Shooting
Using Other Flashes
1.Turn on the flash’s power switch and set the camera’s mode dial to program.
The flash cannot be fired in auto mode.
2.Set the
The flash will fire at full strength under the following conditions.
Shutter Speed: | 1/90 second fixed | |
ISO Sensitivity: | 100 equivalent (large image size) | |
|
| |
| 200 equivalent (small image size) | |
|
| |
Exposure Compensation: | Incapable of firing | |
|
|
|
Select the optimal aperture setting according to the flash guide number and the distance from the subject.
•The flash will not fire if the aperture is set to auto. You must specify an aperture value.
3.Press the shutter button halfway.
The camera’s indicator will flash green when it is ready to shoot. Check the flash’s indicator to verify that it is fully charged and ready.
4.Press the shutter button all the way and take the shot.
Flashes made by manufacturers other than Canon may not fire.
66
