Shooting

Using the LCD Monitor

You can use the LCD monitor as a viewfinder for shooting images. It is particularly recommended for shooting in macro mode, since the field shown by the optical viewfinder differs from the actual area photographed in that mode.

Using the LCD monitor as a

Viewfinder for Shooting

1.Open the LCD monitor to a comfort- able position for viewing.

2.Set the mode dial to auto or program.

3.Press the LCD/Video button.

The LCD monitor will turn on.

LCD/VIDEO

Pressing the shutter button halfway will freeze the display until the autofocus and metering process is complete.

The recorded image will display on the LCD monitor if you continue to press the shutter button fully after the shot is taken.

4.To turn the LCD monitor off, press the LCD/Video button again.

Checking the Recorded Image with the LCD Monitor

The review function allows you to check the image on the LCD monitor after it has been shot even if the monitor has not been turned on. This function conserves the battery charge since the LCD monitor remains off except while the image is being checked.

1.Set the mode dial to auto or program.

48

Page 50
Image 50
Canon Pro70 manual Using the LCD Monitor, Using the LCD monitor as a Viewfinder for Shooting