Carrier 58CTA/CTX instruction manual Horizontal Unit Suspension, Horizontal Suspension with Straps

58CT

1/4" (6 mm) THREADED ROD

4 REQ.

OUTER DOOR

ASSEMBLY

SECURE ANGLE

IRON TO BOTTOM

OF FURNACE WITH

3 #8 x 3/4" (19 mm) SCREWS TYPICAL FOR 2 SUPPORTS

8” (203 mm) MIN FOR DOOR REMOVAL

1" (25 mm) SQUARE, 11/4" x 11/4" x 1/4" (32 x 32 x 6 mm) ANGLE IRON

OR UNI-STRUT MAY BE USED

(2)HEX NUTS, (2) WASHERS & (2) LOCK WASHERS REQ. PER ROD

A02345

Fig. 15 - Horizontal Unit Suspension

METHOD 2

USE (4) #8 x 3/4 (19 mm) SHEET

METAL SCREWS FOR EACH

STRAP. THE STRAPS

SHOULD BE VERTICAL

AGAINST THE FURNACE

SIDES AND NOT PULL AWAY

FROM THE FURNACE

SIDES.

METHOD 1

FOLD ALL STRAPS UNDER FURNACE AND SECURE WTH

(4) #8 x 3/4 (19 mm) SHEET METAL SCREWS (2 SCREWS IN SIDE AND 2 SCREWS

IN BOTTOM).

A03176

Fig. 16 - Horizontal Suspension with Straps

14