Casio ACS V6000 manual To use Telnet to connect to a device through a serial port

8 ACS v6000 Installation/Administration/User Guide

To use Telnet to connect to a device through a serial port:

For this procedure, you need the username configured to access the serial port, the port name (for example, 14-35-60-p-1), device name (for example, ttyS1), TCP port alias (for example, 7001) or IP port alias (for example, 100.0.0.100) and the hostname of the virtual console server or its IP address.

To use a Telnet client, enter the information in the dialog boxes of the client.

-or-

To use Telnet in a shell, enter the following command:

#telnet [hostname IP_address]

login: username:[portname device_name]

-or-

#telnet [hostname IP_address] TCP_Port_Alias

login: username

-or-

#telnet IP_Port_Alias

login: username

To close a Telnet session:

Enter the Telnet hotkey defined for the client. The default is Ctrl ] + q to quit, or enter the text session hotkey for the CLI prompt and then enter quit.

To use SSH to connect to a device through a serial port:

For this procedure, you need the username configured to access the serial port, the port name (for example, 14-35-60-p-1), TCP port alias (for example, 7001), device name (for example, ttyS1), and the hostname of the virtual console server, IP address or IP Port alias (for example, 100.0.0.100).

To use an SSH client, enter the information in the dialog boxes of the client.

-or-

To use SSH in a shell, enter the following command:

ssh -lusername:port_name [hostname IP_address]

-or-

ssh -lusername:device_name [hostname IP_address]