Zoom factor Image area
Current display area

Zooming an On-screen Image

1.In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed.

2. Rotate the zoom controller towards z ([) to zoom.

You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. You can also use the control dial to scroll upwards and downwards, and the function ring to scroll left and right. Rotate the zoom controller towards w to unzoom the image.

–When monitor screen contents are turned on, a graphic in the lower right corner of the screen shows what part of the zoomed image is currently

displayed.

– To exit the zoom screen, press [MENU].

– Though the maximum image zoom factor is 8X, certain image sizes may not allow zooming up to the full 8X.

• Pressing [SET] will lock the current zoom factor for the on-screen image. You can then use [4] and [6] to scroll between images, using the same zoom factor. Pressing [SET] again will unlock the zoom factor and allow you to use [8], [2], [4] and [6] to move around the currently displayed images. This function cannot be used while viewing CS group images or movies. Also, CS group images and movies will not appear when you are scrolling images with [4] and [6].

Displaying the Image Menu

1. In the PLAY mode, rotate the zoom controller

Boundary

towards w (]).

 

 

Use [8], [2], [4] and [6] to move the selection boundary around the image menu.

To view a particular image, use [8], [2], [4], or [6] to move the selection boundary to the image you want and then press [SET].

•In the case of a movie or a continuous shutter (CS) file, the first frame of the file will be displayed.

•You can scroll forward and back between image menu pages by rotating the function ring.

123

Viewing Snapshots and Movies