Connecting Directly to a PictBridge Compatible Printer
You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “¥ SETTING” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PictBridge”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to your printer’s USB port.
•For details about connecting to the camera and precautions when connecting, see page 22.
USB port
USB
Small connector
Large connector 
USB cable
(included with camera)
•The camera does not draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.
•Make sure that the camera is turned off before plugging in or unplugging the cable. Check the user documentation that comes with the printer for information about requirements before plugging into or unplugging from the printer.
141 | Printing |
|