IMPORTANT!
•When on an aircraft or in any other location where use of wireless communication is limited or prohibited, do not use a FlashAir card, or change the camera’s “FlashAir” setting (page 164) and the FlashAir card’s setting to those shown below. FlashAir: Off
Memory Card: Start with the control image
•Loading a FlashAir card into the camera will cause the FlashAir icon 
to appear on the monitor screen.
Transparent |
| No wireless LAN connection |
|
|
|
Not transparent |
| Communication enabled |
|
|
|
Flashing |
| Running (Communication disabled) |
|
|
|
•The following applies to camera operations while image data on a FlashAir card is being manipulated from a smartphone or other device.
–
icon displayed on the monitor screen.
–The Sleep function (page 167) and Auto Power Off function (page 167) are disabled.
–A confirmation message appears on the monitor screen if you try to turn it off. If this happens, follow the instructions in the message (page 197).
•The FlashAir wireless LAN connection is automatically terminated if no operation is performed for a certain amount of time.
•Recording or playing back a movie to a FlashAir card can result in breaks in the image and/or audio.
•Proper FlashAir card communication may not be possible due to camera settings, battery level, or operating conditions.
•Changing the configuration of camera settings and performing other operations may take longer than normal when a FlashAir card is running.
159Using the Camera with a Computer