Auto Image Orientation Detection and Rotation (Auto Rotate)
Procedure
[MENU] * “¥ SETTING” Tab * Auto Rotate
On | Automatically rotates snapshots shot with the camera held vertically | |
90 degrees. | ||
| ||
Off | Images not rotated automatically. | |
|
|
The camera automatically detects whether a snapshot image was shot in portrait or landscape orientation and displays it accordingly.
Specifying the File Name Serial Number Generation Rule (File No.)
Procedure
[MENU] * “¥ SETTING” Tab * File No.
Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 160).
Tells the camera to remember the last used file number. A new file will be named using the next sequential number, even if files are deleted or if a blank memory card is loaded. If a memory card is
Continue loaded and that card already has files stored on it and the largest sequential number in the existing file names is greater than the
largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the memory card file names plus 1.
Restarts the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. If a memory
Reset card is loaded and that card already has files stored on it, numbering of new files will start from the largest sequential number in the memory card file names plus 1.
166 | Other Settings (SETTING) |
|