.Tilting the Monitor Screen
As shown in the figure below, pull upwards on the bottom center of the monitor screen at point A. The monitor screen will open up to 90 degrees and stop momentarily.
Keep lifting and it will tilt upwards up to 180 degrees.
•Do not pull downwards from the top of the monitor screen. Be sure to pull upwards from the bottom of the monitor screen as shown in the figure.
OKNG
A
IMPORTANT!
•Under factory default settings, the camera will turn on automatically whenever the monitor screen is tilted. See page 167 for information about configuring the camera so it does not turn on when the monitor screen is tilted upwards.
•When returning the monitor screen to the back of the camera, take care so you do not catch your fingers between the top or bottom of the monitor screen and the camera.
•Do not subject the monitor screen to strong impact. Doing so can damage it.
NOTE
•Be sure to return the monitor screen to its normal position behind the camera when you are not using it.
•Whenever placing the camera on a tabletop or other surface to shoot, be sure to pull out the stand to keep it from falling over (page 20).
18 | Quick Start Basics |
|