Saving a Second Normal Image When Shooting With HDR Art (Double (HDR ART))
You can configure the camera to save two images when shooting with HDR Art: one image with HDR Art effects applied in accordance with the scene you selected plus another normal (Program Auto) image without any effects applied.
1.Align the mode dial with [C] and then press [MENU].
2.Press [4], use [8] and [2] to select the “r REC MENU” tab, and then press [6].
3.Use [8] and [2] to select “Double (HDR ART)” and then press [SET].
4.Use [8] and [2] to select “On” and then press [SET].
While “Off” is selected for the above step, only a single HDR Art image is saved (normal image not saved).
5.Press the shutter button to shoot.
Creating and Using Your Own Setups (CUSTOM SHOT)
You can register up to 12 setups, based on snapshots shot with the camera, as CUSTOM SHOT scenes. Selecting a registered CUSTOM SHOT scene configures the camera with its settings.
.To register a CUSTOM SHOT scene
1.Align the mode dial with [C] (CUSTOM SHOT).
2.Press [SET].
•A message will appear if there are no CUSTOM SHOT scenes currently registered. If there is one or more images that are supported for CUSTOM SHOT scene registration, press [SET] to advance to step 5, below. Otherwise proceed with step 3.
3.Use [8] and [2] to select C (Custom Scene) and then press [SET].
4.Use [8], [2], [4], and [6] to select “CUSTOM SHOT” (New Scene), and then press [SET].
5.Use [8], [2], [4], and [6] to select a snapshot.
6.Use [8] and [2] to select “Save” and then press [SET].
68 | Snapshot Tutorial |
|