
.To connect the camera to your computer and save files
1.Turn on the camera and press [MENU].
2.On the “¥ SETTING” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “Mass Storage”, and then press [SET].
4.Turn off the camera and then use the USB cable that comes with the camera to connect it to your Macintosh.
•For details about connecting to the camera and precautions when connecting, see page 23.
USB port
USB
USB cable
5.Turn on the camera.
The camera’s back lamp will light green or amber at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s
•The first time you connect the camera to your Macintosh with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.
6.
7.Drag the “DCIM” folder to the folder to which you want to copy it.
8.After the copy operation is complete, drag the drive icon to Trash.
9.Disconnect the camera from the computer.
After confirming that the back lamp is not flashing red, disconnect the USB cable.
154Using the Camera with a Computer