8.Use [8] and [2] to select the 
(Maximum CS Shots) Control Panel option and then press [SET].
9.Use [8] and [2] to select the maximum number of shots and then press [4].
10.Use [8] and [2] to select the 
(Pre-record CS Shots) Control Panel option and then press [SET].
11.Use [8] and [2] to select the number of Prerecord (Still) images and then press [SET].
•Settings: 0 shots, 3 shots, 5 shots, 10 shots, 15 shots, 20 shots, 25 shots
•If you select “0 shots”, no pre-record images will be stored when you half-press the shutter button.
12.Half-press and hold the shutter button to start pre-recording.
A pre-record buffer is continually updated with images as long as the shutter button is pressed.
•The camera will not emit shutter sounds as it pre-records images.
•Releasing the half-pressed shutter button will cause the contents of the pre- record buffer to be deleted.
13.Full press and hold down the shutter button.
This will record the images in the pre-record buffer followed by real-time recorded images. Shooting of images will continue as long as you depress the shutter or until the maximum number of images specified by “High Speed CS fps” is reached.