Advanced Settings (REC MENU)

The following are menu operations you can use to configure various camera settings.

•You also can use the Control Panel (page 43) to configure some of the settings that appear on the menu screen. Refer to the page references provided in this section for information about configuring settings using the Control Panel.

Configuring Recording Settings

.Example Menu Screen Operation

1.In the REC mode, press [MENU].

This will display the menu screen (r REC MENU).

•Menu contents are different in the REC mode (r REC MENU) and PLAY mode (p PLAY MENU).

2.Press [4], use [8] and [2] to select the tab where the menu item you want to configure is located, and then press [6].

[8] [2] [4] [6]

[MENU] [SET]

3.Use [8] and [2] to select the menu item you want, and then press [6].

•Operating the zoom controller displays the next page of menu items.

4.Use [8] and [2] to change the setting of the selected menu item.

5.After the setting is the way you want, press [SET] to apply the setting and return to the viewfinder screen.

Example:

When “Self-timer” is selected on the “r REC MENU” tab

Tabs

• Pressing [4] registers the selected setting and

 

returns to the menu.

Items

•To configure settings on another tab, press [4] twice to return to the tab, use [8] and [2] to

select a tab, and then press [6]. Next, proceed from step 3 of the above procedure.

•Pressing [MENU] interrupts the menu operation and exits the menu screen.

NOTE

•Depending on the recording mode, some of the items on the menu that appears may not be usable.

98

Advanced Settings (REC MENU)