Using the Control Panel
The Control Panel can be used to configure camera settings.
1.In the REC mode, press [SET].
•You can also display the Control Panel by pressing [2].
[8] [2] [4] [6]
[SET]
2.Use [8] and [2] to select the setting you want to change, and then press [SET].
This will select one of the Control Panel icons and display its settings.*
2White balance (page 46)
3Focus (page 48)
4ISO sensitivity (page 51)
6EV shift (page 53)
7Flash (page 54)
8Metering (page 56)
Control Panel
1
2
3
4
5
6
7
8
*Items displayed in the Control Panel depend on the recording mode.
3.Use [8] and [2] to change the setting.
4.If you want to configure another setting, repeat steps 2 and 3.
5.After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
•You also can use
43 | Snapshot Tutorial |
|