Configuring Handsfree Mode Settings (Handsfree)

Use the procedure below to configure Handsfree Mode settings.

1.In the REC mode, press [MENU].

2.Press [4], use [8] and [2] to select the “r REC MENU” tab, and then press [6].

3.Use [8] and [2] to select “Handsfree” and then press [SET].

4.Configure Handsfree settings.

Setting

Description

 

Specifies the camera operation that enters the Handsfree

 

Mode.

 

Always:

Motion Shutter

The camera always remains in the Handsfree Mode,

regardless of whether or not the monitor screen is tilted.

 

180°only:

 

The camera enters the Handsfree Mode only when the

 

monitor screen is tilted upwards 180 degrees.

 

Off: Handsfree Mode disabled

 

 

 

Specifies the amount of time that should elapse until

Timer

shooting starts after the camera detects movement.

 

Settings: 0.5 sec, 1 sec, 2 sec, 10 sec

 

 

Repositioning the Motion Detection Area (Motion Position)

Use the procedure below to reposition the motion detection area (Start self-timer icon) as required when it (or the preview icon ) hinders your view of the display image.

1.In the REC mode, press [MENU].

2.Press [4], use [8] and [2] to select the “r REC MENU” tab, and then press [6].

3.Use [8] and [2] to select “Motion Position” and then press [SET].

4.Press [RING].

•This will select one of the two icons on the display. Pressing [RING] toggles the selection between the start self-timer icon and the preview icon.

Start self-timer icon

Preview icon

64

Snapshot Tutorial