22 CHAPTER 3: CABLE MODEM CONFIGURATION
If you are using a 3Com U.S. Robotics external analog
modem in conjunction with your Cable Modem TMX, turn
to "Using the Cable Modem TMX" on page 24. Otherwise,
see the following section for information about configuring
non-3Com U.S. Robotics modems.
Configuring Non-3Com U.S. Robotics Modems for Use with the TMX
The TMX cable modem is designed to work with a variety
of external V.34 modems. If you're using an external
modem other then a 3Com U.S. Robotics external modem,
please verify that your modem meets these minimum
requirements.
■Modem must be AT command set addressable
■Modem must support the V.34, V.34bis, or V.90
standard