Castelle OfficeDirect Storage Server manual Using the Storage Servers Storage

USING THE STORAGE SERVER'S STORAGE

USING THE STORAGE SERVER'S STORAGE

To use the Storage Server's storage, you must "Map" a drive letter to each folder on the Storage Server folder which you wish to access. The "Drive" will then be available to all Windows programs. To enable the Storage Server’s storage:

1.Double-click the Network Neighborhood icon on the desktop.

2.Locate the Storage Server, as shown below. If it is not listed, double-click Entire Network. Then, double-click the Workgroup that the Storage Server is in. (By default, the Storage Server is in Workgroup.)

3.Double-click the Storage Server icon

4.Right-click a folder (directory) to which you have access, and select Map Network Drive, as shown below

.

5.Select a drive letter for this folder, and check the Reconnect at Logon checkbox. (If this is not done, the mapping will be lost when you shut down your PC.) Click OK.

WINDOWS CLIENT SETUP 29