Castelle OfficeDirect Storage Server Storage Server Setup Using Windows, Software Installation

STORAGE SERVER USER ’S GUIDE

be ON. Then, during the boot process, the Ready, Alert and Disk Full LEDs will be ON. Once the boot process is finished, the Ready LED should be ON and the Alert LED should be OFF. If the Alert LED stays ON, there is a hardware problem. Repeated beeps also indicate a failure to boot correctly.

NOTE: If the Storage Server is powered on and in Ready mode DO NOT pull the power adapter without first shutting down the Storage Server. Disconnecting power prior to shutdown causes a 15 to 20 minute check disk process. Please see page 30 for proper shutdown procedures.

STORAGE SERVER SETUP USING WINDOWS

For basic operation, only the following setup is required. For further Administrative options, see Chapter 3 - Administration.

Software Installation

1.Place the Storage Server setup CD-ROM in the drive of your Windows system. If setup does not start automatically, run SETUP.EXE in the root directory.

2.Follow the prompts to install the Storage Server Utility.

Using the Storage Server Utility

1.From the Start Menu, select Programs>OfficeDirect

Storage Server> Storage Server Utility

.

Storage Server Setup Utility

8