Cateye MODEL EC-1600 operating instructions Using chestbelt heart rate sensor, Setting the date

Using chestbelt heart rate sensor

Wireless chestbelt sensor picks up your heart rate

In place of the earlobe pulse sensor, the EC-1600 can also receive your pulse signal transmitted from a particular type of wireless chestbelt sensor. The "Wireless Pulse Sensor Kit" (an optional item) is recommended for the customers who may feel inconvenience in picking up the pulse rate from the earlobe.

Function of wireless chestbelt sensor

The wireless chestbelt sensor is a simplified and compact electrocar- diograph as widely used in hospitals on the same principle. At hospi- tals, electrodes are attached to several parts of the body, and a cardio- gram is determined on the basis of potential differences among those electrodes. The chestbelt sensor picks up the heart rate more simply through potential difference between two electrodes built-in there and in contact with the body.

The pulse data are transmitted to the control unit by radio wave, thus eliminating inconveniences of handling the sensor cable and offering concentrated intense training.

The "Wireless Heart Rate Sensor Kit" consists of a chestbelt sensor unit (transmitter) and a receiving circuitry to be mounted inside of the control unit.

Attaching the chestbelt sensor

The chestbelt sensor should be put around your chest with two elec- trodes in contact with your body at the center.

For further information, please refer to the Manual enclosed in the "Wireless Heart Rate Sensor Kit" (an optional item).

Chestbelt heart rate sensor adapted in

position

Direct contact to lower chest skin is ideal in use.

Setting the date

Displaying the Date

• W h i l e h o l d i n g d o w n

the MODE button, hit the RE-	and time are displayed. (as displayed in the lower column)
SET button once, and the date	Setting the Date
	• By each press of the MODE button, different numerics will blink in
		EC-1600		RESET
			CADENCE
			PROGRAM
			NAME
			PEDAL
			TORQUE	10	1
				10	1
		TIME
		Interval Training Preference		MODE
		TLD 1. 15 sec. work 45 sec. relief
		Dash (Sprint Power) Training
		TLD 2. 30 sec. work 60 sec. relief
		Speed (Anaerobic Power) Training
		TLD 3. 60 sec. work 30 sec. relief
		Stamina (Aerobic Power) Training
		TLD.4. Make a training pattern as desired.
		Hill Profile Preference		ADV

Intensity of program is adjusted according to PRF Number. PRF 1 is least intense.

PRF 8 is most intense.

PRF 9. Design a profile as desired.

the sequence of minute- hour-date-month-year.

•Set the date and time by pressing the buttons to increase or decrease the blinking numeric.

•Once the minute is set, the clock starts working. So set at the actual minutes without considering the time for setting other data.

Finishing the Setting

	year
month	date
hour	minute

TIME

• When the setting is over, press

the ADV button. The LCD returns to the initial display (screen to select a program).

• The date is printed out at the beginning of a printer printout.

48 49