Chapter 2 Parts and their Functions

2-1 Power Supply and Accessory Mounting Section

2

POWER switch

Lens mount cap

Used to turn on/off the power.

To remove the cap, raise the lens lever.

 

When the lens is not mounted, replace the cap.

Battery mount

A battery pack from Anton/Bauer is mounted here.

DC IN (external power input) socket (XLR, 4P)

To operate your AJ-SPX900E on AC power, the AC adaptor AJ-B75 (optional accessory) must be connected to this socket.

Lens cable/microphone cable clamp

This clamp secures the lens and microphone cables.

Tripod mount

When you want to mount the AJ-SPX900E on a tripod, the optional tripod adaptor (SHAN-TM700) is attached here.

BREAKER switch

When an excessive amount of current is fed through the video camera-recorder, due to any abnormal event, the breaker automatically turns off the power in order to protect the device.

After the interior of the video camera-recorder has been checked and/or repaired, this button must be depressed. If there is no unusual reaction, the unit can be powered-up.

LENS jack (12-pin)

The lens connection cord is connected here. For a detailed description of your lens, see the relevant manufacturer’s instruction manual.

GPS connector

This connects the optional GPS unit AJ-GPS900G.

Shoulder strap fittings

The shoulder strap is attached here.

Light shoe

A video light or similar accessory can be attached here.

Lens mount (bayonet type)

The lens is attached here.

Lens lever

Lower this lever to lock the lens to the lens mount.

11