Chapter 3 Recording and Playback

3-1 P2 Cards

Inserting P2 Cards

<Note>

When using the camera-recorder for the first time, be sure to set the time data beforehand. On how the time data is set, see [4-5 Setting Time Data].

1 Turn on the POWER switch.

POWER: ON

2 While pressing down the slide lock button, slide the slide- out door to the left.

The door opens.

Slide lock button

Slide-out door

3 Insert a P2 card into the P2 card slot until the EJECT button pops up.

EJECT button

The card must be inserted with the logo right way up.

4 Tilt up the popped-up EJECT button, to lock-in the P2 card.

P2 card

LED

5 Insert a P2 card into the AJ-SPX900E. The P2 CARD ACCESS LED for the appropriate slot indicates the status of the P2 card.

For how the P2 card status is indicated, see [P2 CARD STATUS LED and status of P2 cards] on the next page.

6 Close the slide-out door.

<Note>

Do not leave the slide-out door open when moving the AJ- SPX900E.

22