Press the THUMBNAIL button to display the thumbnail screen on the LCD monitor. Pressing the THUMBNAIL button again returns the display to the regular display. When switching is done from the regular screen display to the thumbnail screen display, all the clips will be displayed on the thumbnail screen.
Also, pressing the MENU BAR button in the thumbnail screen moves the pointer to the menu bar and enables thumbnail menu manipulation.
<Note>
With the TCG switch positioned at [SET], when the time code or user bits are set or when camera menus are being manipulated, thumbnails cannot be manipulated.
Thumbnail Screen
Display Mode
Indicates the thumbnail types displayed on the screen.
ALL: Display all clips.
SELECTED:
Display randomly selected clips.
MARKED: Display clips with shot marks.
VOICE MEMO:
Display clips with voice memo data.
SLOT: Display clips in the specified P2 card.
Please refer to
Slot Number
Indicates the P2 card in which the clip under the pointer is recorded. The slot number of the P2 card that contains the clip is displayed in yellow.
If the clip is recorded across multiple P2 cards, all the slot numbers of the P2 cards that contain the clip are displayed. The slot numbers of the other P2 cards, if inserted, are displayed in white.
Clip Number
The numbers set by the camera for all the clips recognised correctly by the P2 card. These numbers are allocated in chronological order, by shooting dates and times.
Thumbnail
The image captured immediately after you start shooting is displayed as a thumbnail.
Time Display
You can set this to display the time code at the start of clip recording, the user bits at the start of clip recording, the shooting time, the shooting date or the shooting and date. Please refer to
The factory setting is the time code at the start of clip recording.
Menu Bar
The Menu Bar includes menus for manipulating clips and switching/setting the thumbnail display.
Press the MENU BAR button on the thumbnail screen to
manipulate the menu bar. Use the cursor ( | ) and SET |
buttons to select the menu. |
|
THUMBNAIL: |
|
To switch the thumbnail display and set the display mode. |
|
OPERATION: | 6 |
To delete clips and format a P2 card.
PROPERTY:
To display clip properties and P2 card status.
EXIT:
To return the pointer to the thumbnail.
Incomplete Clip Indicator
Indicates that although a clip is recorded across multiple P2 cards, one of these cards is not inserted into a P2 card slot.
Voice Memo Indicator
This marker is displayed for a clip with a voice memo attached. Please refer to
Wide Clip Indicator
This marker is displayed for clips recorded with the 16:9 aspect ratio.
Shot Mark Indicator
This marker is displayed for a clip with a shot mark attached. Please refer to
Defective Clip Indicator
This marker is displayed for defective clips, which may result from a variety of causes, e.g.,
A clip displayed with a yellow corrupt marker can be restored. Please refer to
A clip displayed with a red corrupt marker cannot be restored and must be deleted. If the clip cannot be deleted, format the P2 card.
77