To read data on an SD card:
1 Turn the JOG dial button to move the cursor to the option [SD CARD READ/WRITE]. Then, press the dial button.
To select a file number:
2 Turn the JOG dial button to move the cursor to the menu option [R. SELECT]. Then, press the dial button.
6 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.
When the data has been read, the following message appears:
4
3 Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button.
To read data on a selected file:
4 Turn the JOG dial button to move the cursor to the option [READ].
5 Press the JOG dial button to display the following message:
The data will not be read if any of the following messages appears when the JOG dial button is pressed:
Error message | Remedy |
|
|
READ NG | Insert an SD card. |
NO CARD |
|
(No SD card inserted.) |
|
|
|
READ NG | The card has not been formatted |
FORMAT ERROR | using the |
(SD card not properly formatted.) | Replace the card. |
|
|
READ NG | Write file data. |
NO FILE |
|
(No file found.) |
|
|
|
READ NG | Only data written with the AJ- |
ERROR | SPX900E is readable. |
(SD card not readable.) |
|
|
|
READ NG | Example: The SD card is not |
CANNOT ACCCESS | accessible because it is being |
(SD card not accessible). | played back. |
| After the operation in process, |
| read data. |
|
|
7 To exit the menu, press the MENU button.
The settings menu will be replaced by status indications for the
59