5-6 Attaching the Shoulder Strap
Shoulder Strap
Press to open the hook.
To detach the shoulder strap, first open the hooks, then detach the strap.
<Note>
Make sure that the shoulder strap is securely attached.
5-7 Attaching the Rain Cover
When using the SHAN-RC700 Rain Cover
Tighten the cord
Secure with the
surface fastener
Secure with the surface fastener
5-8 Connecting the AJ-EC3E Extension Controller
Some functions can be remote-controlled when the AJ-EC3E extension control unit (optional) is connected to the camera. When the AJ-EC3E is connected, the camera automatically enters remote control mode after the power switches of both the camera and the AJ-EC3E are turned ON.
Controller Cable
AJ-
w
ECU Connector
AJ-EC3E
<Notes>
z Be sure to turn OFF both the camera and the AJ-EC3E power switches before connecting or disconnecting the controller cable.
z If ECU DATA SAVE is set to OFF, the camera-related setting values, which have been adjusted or set using the AJ-EC3E, will be canceled when the camera power switch is turned OFF. Also, the setting values cannot be written to an SD card. However, the menu settings performed using the AJ-EC3E can be written to an SD card. Next time the AJ-EC3E is connected, the setting values will return to the AJ-EC3E settings.
ECU DATA SAVE can be selected from the <SW MODE> screen on the CAM OPERATION page.
z If ECU DATA SAVE is set to ON, the values adjusted or set using the AJ-EC3E are retained, even after the camera power switch is turned OFF.
z The USER switch on the camera does not function when the AJ-EC3E is connected.
z When controlling the shutter from the AJ-EC3E, the shutter speeds correspond to the speeds set by the menu on the camera, not the speeds written on the AJ-EC3E. The shutter speeds correspond as follows:
| AJ-EC3E | Camera Shutter Speeds |
| Shutter Speed Indication |
| | |
| | |
| 100 (60) | POSITION1 | |
| | |
| 120 | POSITION2 |
| | |
| 250 | POSITION3 |
| | |
| 500 | POSITION4 |
| | |
| 1000 | POSITION5 |
| | |
| 2000 | POSITION6 |
| | | |